Arduino 컨트롤 및 처리 인터페이스를 통합하려고합니다. 내 Arduino 코드에는 a1, a0 및 d0 핀 (모두 digitalRead)에 연결된 세 개의 버튼이 있습니다.Arduino 및 처리 통합 - 단추 카운터
int x;// assigned to A0 input
int y;// assigned to A1 input
int z; //assigned to D0 input
int votes[3]={0,0,0};
void setup() {
// initialize the serial communication
Serial.begin(9600);
while(!Serial);
}
void loop() {
// first we need to read the values from the BUTTONS
x = digitalRead(A0);
y = digitalRead(A1);
z = digitalRead(0);
if(digitalRead(A0) == HIGH)
{
Serial.print("cat1 ");
Serial.print(votes[0]=votes[0]+1);
Serial.print("\n");
}
else if(digitalRead(A1) == HIGH)
{
Serial.print("cat2 ");
Serial.print(votes[1]=votes[1]+1);
Serial.print("\n");
}
else if(digitalRead(0) == HIGH)
{
Serial.print("cat3 ");
Serial.print(votes[2]=votes[2]+1);
Serial.print("\n");
}
delay(200);
}
I는 막대 그래프로 처리마다의 버튼을 누르면 시간 표시를 증가 카운터 싶다. 버튼을 누를 때마다 막대 그래프가 약간 올라갑니다. 이 경우 3 개의 줄 중 하나 (3 개의 단추와 연결됨)가 눌러지기를 원합니다.
처리 코드
은 다음과 같습니다 :import processing.serial.*;
// Serial Port variables
Serial myPort;
String buff = "";
String buff1 = "";
String buff2 = "";
int index = 0;
int NEWLINE = 10;
// Store the last 256 values from the sensors so we can draw them.
int[] valuesx = new int[256];
int[] valuesy = new int[256];
int[] valuesz = new int[256];
void setup()
{
// set size of the window
size(512, 512);
// turn on anti-aliasing, this makes things look smoother
smooth();
println(Serial.list()); // use this to determine which serial port is your Arduino
myPort = new Serial(this, Serial.list()[0], 9600);
myPort.bufferUntil('\n');
}
// draw() happens every frame of the sketch. This is where all the calculations are made.
// When draw() is finished executing, it executes again, over and over.
void draw() {
// set the background to purple
background(87, 36, 124);
// set stroke weight(thickness of the line) to 5 pixels
strokeWeight(5);
for (int i = 0; i < 255; i++) {
stroke(247, i);
// draw the line (x1, y1, x2, y2)
line(1, valuesx[i], 1, valuesx[i + 1]);
line(5, valuesy[i], 5, valuesy[i + 1]);
line(10, valuesz[i], 10, valuesz[i + 1]);
}
// Check the Serial port for incoming data
while (myPort.available() > 0) {
// if there is data waiting...
// execute serialEvent() function. Look below to see how SerialEvent works.
serialEvent(myPort.read());
}
}
// serialEvent controls how incoming serial data from the Arduino module is handled
void serialEvent(int serial)
{
if (serial != NEWLINE) {
// Store all the characters on the line.
buff += char(serial);
}
else {
// The end of each line is marked by two characters, a carriage
// return and a newline. We're here because we've gotten a newline,
// but we still need to strip off the carriage return.
buff = buff.substring(0, buff.length()-1);
index = buff.indexOf(",");
buff1 = buff.substring(0, index);
buff2 = buff.substring(index+1, buff.length());
// Parse the String into an integer. We divide by 4 because
// analog inputs go from 0 to 1023 while colors in Processing
// only go from 0 to 255.
int x = Integer.parseInt(buff1)/2;
int y = Integer.parseInt(buff2)/2;
// Clear the value of "buff"
buff = "";
// Shift over the existing values to make room for the new one.
for (int i = 0; i < 255; i++)
{
valuesx[i] = valuesx[i + 1];
valuesy[i] = valuesy[i + 1];
}
// Add the received value to the array.
valuesx[255] = x;
valuesy[255] = y;
}
}
불행하게도, 나는 여기가 버튼을 누를 때 내가 오류입니다.