포트 8059에서 수신 대기하도록 내 서버에 node.js라는 프로그램을 설치했습니다.프로그램을위한 init.d 스크립트를 어떻게 설정합니까?
내 서버는 hostgator의 VPS 패키지 레벨 3입니다.
이제 init.d 스크립트를 만들어 node.js가 자동으로 시스템에서 실행되고 자동으로 충돌 한 경우 다시 시작할 수 있습니다.
약간의 검색 결과를 얻은 후, 저는 일부 리소스를 발견하고 init.d 스크립트를 매시업했습니다. 그것의 더 많은 복사 붙여 넣기 직업의 볼 수 있습니다 :) 나는 아마도 가장 잘못된 스크립트를 포함하는 init.d 스크립트를 포함하는 꽤 문제가 있습니다.
#! /bin/sh
#
# Copyright (c) 2011 Anjan Bhowmik
# All rights reserved.
# Author: Anjan Bhowmik, 2011
#
# /etc/init.d/nodejs
# and its symbolic link
# /usr/sbin/rcnodejs
### BEGIN INIT INFO
# Provides: nodejs
# Required-Start: $network
# Required-Stop:
# Default-Start: 3 5
# Default-Stop: 0 1 2 6
# Short-Description: Node.js daemon
# Description: NOde.js server that listens to port 8088
### END INIT INFO
$NODEJS_BIN = $(which node)
$NODEJS_JS_FILE = /home/anjan/server.js
# Load the rc.status script for this service.
. /etc/rc.status
# Reset status of this service
rc_reset
case "$1" in
start)
echo -n "Starting node.js "
## Start daemon with startproc(8). If this fails
## the return value is set appropriately by startproc.
startproc $NODEJS_BIN $NODEJS_JS_FILE
# Remember status and be verbose
rc_status -v
;;
stop)
echo -n "Shutting down node.js "
## Stop daemon with killproc(8) and if this fails
## killproc sets the return value according to LSB.
killproc -TERM $NODEJS_BIN
# Remember status and be verbose
rc_status -v
;;
restart)
## Stop the service and regardless of whether it was
## running or not, start it again.
$0 stop
$0 start
# Remember status and be quiet
rc_status
;;
reload)
# If it supports signaling:
echo -n "Reload service node.js "
killproc -HUP $NODEJS_BIN
#touch /var/run/BAR.pid
rc_status -v
## Otherwise if it does not support reload:
#rc_failed 3
#rc_status -v
;;
status)
echo -n "Checking for service node.js "
## Check status with checkproc(8), if process is running
## checkproc will return with exit status 0.
# Return value is slightly different for the status command:
# 0 - service up and running
# 1 - service dead, but /var/run/ pid file exists
# 2 - service dead, but /var/lock/ lock file exists
# 3 - service not running (unused)
# 4 - service status unknown :-(
# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
# NOTE: checkproc returns LSB compliant status values.
checkproc $NODEJS_BIN
# NOTE: rc_status knows that we called this init script with
# "status" option and adapts its messages accordingly.
rc_status -v
;;
*)
## If no parameters are given, print which are avaiable.
echo "Usage: $0 {start|stop|status|restart|reload}"
exit 1
;;
esac
rc_exit
다른 시스템이 다른 접근 방식을 사용함에 따라 혼란스러워집니다. 나의 지역 우분투는 upstart라고 불리는 것을 사용하지만, 나의 서버는 upstart를 가지고 있지 않으며 init.d 스크립트만을 사용한다. 나는 "끝나면 uname -a"를 실행하면
난이 얻을 :
Linux onl.onlyfreelancer.com 2.6.18-028stab070.14 #1 SMP
Thu Nov 18 16:04:02 MSK 2010 x86_64 x86_64 x86_64 GNU/Linux
또한, 나는이있는 init.d 스크립트를 사용하려면 "insserv"와 같은 유틸을 찾을 수 없습니다. 그래서 내 init.s 스크립트가 맞다면, 어떻게 올바르게 설정할 수 있습니까?
어떤 도움을 주셔서 감사합니다. 아직 운이없는 이틀 동안이 일과 싸워 왔습니다.
우분투 10.10에서'less' 명령이 작동하지 않습니다 : -/usr/share/doc/initscripts - * /'와 같은 디렉토리가 없습니다. – pavium
@pavium : "hostgator에서 VPS 패키지 레벨 3 ". –
아 그래,하지만 OP도 우분투 언급 - 다른 완전히. 나는 혼란 스러웠다. – pavium