500 OOPS : vsftpd에 : 독립 구성되지, 인스톨 한후에의 vsftpd에 맥 포트를 사용하는 경우 내가</p> <p><code>sudo /opt/local/sbin/vsftpd</code></p> <p>로 vsftp의 서비스를 시작하고 싶어 할 때 나는 문제가있어 inetd를

Question

에서 시작해야 내가 이 같은 오류가 있습니다

500 OOPS: vsftpd: not configured for standalone, must be started from inetd.

누구나 나를 제안 할 수 있습니까? 어떻게해야합니까?

이

내가 vsftpd에의 빌드가 당신이하려고하는 방법을 시작하도록 구성되지 않았습니다 믿고 내 vsftpd.config

# Example config file /opt/local/etc/vsftpd.conf 
# 
# The default compiled in settings are fairly paranoid. This sample file 
# loosens things up a bit, to make the ftp daemon more usable. 
# Please see vsftpd.conf.5 for all compiled in defaults. 
# 
# READ THIS: This example file is NOT an exhaustive list of vsftpd options. 
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's 
# capabilities. 
# 
# Allow anonymous FTP? (Beware - allowed by default if you comment this out). 
anonymous_enable=YES 
# 
# Uncomment this to allow local users to log in. 
#local_enable=YES 
# 
# Uncomment this to enable any form of FTP write command. 
#write_enable=YES 
# 
# Default umask for local users is 077. You may wish to change this to 022, 
# if your users expect that (022 is used by most other ftpd's) 
#local_umask=022 
# 
# Uncomment this to allow the anonymous FTP user to upload files. This only 
# has an effect if the above global write enable is activated. Also, you will 
# obviously need to create a directory writable by the FTP user. 
#anon_upload_enable=YES 
# 
# Uncomment this if you want the anonymous FTP user to be able to create 
# new directories. 
#anon_mkdir_write_enable=YES 
# 
# Activate directory messages - messages given to remote users when they 
# go into a certain directory. 
dirmessage_enable=YES 
# 
# Activate logging of uploads/downloads. 
xferlog_enable=YES 
# 
# Make sure PORT transfer connections originate from port 20 (ftp-data). 
connect_from_port_20=YES 
# 
# If you want, you can arrange for uploaded anonymous files to be owned by 
# a different user. Note! Using "root" for uploaded files is not 
# recommended! 
#chown_uploads=YES 
#chown_username=whoever 
# 
# You may override where the log file goes if you like. The default is shown 
# below. 
#xferlog_file=/opt/local/var/log/vsftpd.log 
# 
# If you want, you can have your log file in standard ftpd xferlog format. 
# Note that the default log file location is /opt/local/var/log/xferlog in this case. 
#xferlog_std_format=YES 
# 
# You may change the default value for timing out an idle session. 
#idle_session_timeout=600 
# 
# You may change the default value for timing out a data connection. 
#data_connection_timeout=120 
# 
# It is recommended that you define on your system a unique user which the 
# ftp server can use as a totally isolated and unprivileged user. 
#nopriv_user=ftpsecure 
# 
# Enable this and the server will recognise asynchronous ABOR requests. Not 
# recommended for security (the code is non-trivial). Not enabling it, 
# however, may confuse older FTP clients. 
#async_abor_enable=YES 
# 
# By default the server will pretend to allow ASCII mode but in fact ignore 
# the request. Turn on the below options to have the server actually do ASCII 
# mangling on files when in ASCII mode. 
# Beware that on some FTP servers, ASCII support allows a denial of service 
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd 
# predicted this attack and has always been safe, reporting the size of the 
# raw file. 
# ASCII mangling is a horrible feature of the protocol. 
#ascii_upload_enable=YES 
#ascii_download_enable=YES 
# 
# You may fully customise the login banner string: 
#ftpd_banner=Welcome to blah FTP service. 
# 
# You may specify a file of disallowed anonymous e-mail addresses. Apparently 
# useful for combatting certain DoS attacks. 
#deny_email_enable=YES 
# (default follows) 
#banned_email_file=/opt/local/etc/vsftpd.banned_emails 
# 
# You may specify an explicit list of local users to chroot() to their home 
# directory. If chroot_local_user is YES, then this list becomes a list of 
# users to NOT chroot(). 
chroot_local_user=YES 
#chroot_list_enable=YES 
# (default follows) 
#chroot_list_file=/opt/local/etc/vsftpd.chroot_list 
# 
# You may activate the "-R" option to the builtin ls. This is disabled by 
# default to avoid remote users being able to cause excessive I/O on large 
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume 
# the presence of the "-R" option, so there is a strong case for enabling it. 
#ls_recurse_enable=YES 
# 
# When "listen" directive is enabled, vsftpd runs in standalone mode and 
# listens on IPv4 sockets. This directive cannot be used in conjunction 
# with the listen_ipv6 directive. 
listen=YES 
# 
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 
# sockets, you must run two copies of vsftpd with two configuration files. 
# Make sure, that one of the listen options is commented !! 
#listen_ipv6=YES 
# 
# Name of pam module 
pam_service_name=ftpd` 

Answer 1

내 솔루션 문제가 발견되었습니다. vsftpd.config의 이름을 vsftpd.conf로 바꾸면 내 로컬 Mac에서 작동하는 vsftpd.conf로 이름을 바꿀 때 vsftpd.config가 읽히지 않습니다.

Answer 2

입니다. 명령 줄에서 시작하도록 구성된 빌드를 설치하거나 초기 부팅 중에 서비스를 시작하는 inetd 대신 시작해야합니다. /etc/init.d에서 시작 스크립트를 찾으십시오. 일부 배포판에는 부팅하는 동안 시작될 서비스를 관리하기 위해 실행되는 스크립트가 있습니다. 나는 MAC가 없기 때문에 더 많은 지침을 줄 수는 없다. 미안하다.